This community is for professionals and enthusiasts of our products and services.
Share and discuss the best content and new marketing ideas, build your professional profile and become a better marketer together.
The Large Blue Alpine is 25 1/2" deep according to the specs.
I don't know if it has little feet on its extreme edges or not, which would require it being placed on a flat surface that is at least 25 1/2" deep.
So I'm asking: Will it fit fine on a 24" deep table?
Like everyone else's answer, yes the large fits on a 24" table, but here's some additional info that might help someone.
The feet spacing on my large machine (that was just delivered today) is approximately 19.5" side to side, and 22.5" front to back (outer most measurements).
If you're looking to put it on a countertop with a wall flush to it, it will not fit & still be able to be plugged in.
I would say to accommodate for the power cord in the back, it'll need at least a 3" buffer so it doesn't get pinched.
You'll need to extend your countertop to about 28-30" or cut a hole in the wall for the plug/cord to recess into.
I've the Blue Alpine (large) on a Husky toolbox, the top of the toolbox depth measures 24.5 inches deep. There is an inch from the closest point to the foot (rear and front), meaning the feet of the Blue Alpine large are 22.5 inches maximum measure, outer edge to outer edge of each foot.
