Technical Support Forum

Welcome!

This community is for professionals and enthusiasts of our products and services.
Share and discuss the best content and new marketing ideas, build your professional profile and become a better marketer together.

0

Door Not Sealing

Avatar
Brent Marriott

Check that the door is sealing properly. The door seal should create a solid ring most of the way around the door seal about 1/8" thick without vacuum. While under vacuum the black seal should be 1/2" thick all the way around. You may need to clean the black seal as well. If there is any hair, fur, or any other contaminates in or on the seal it could be causing the vacuum error. 


If the door seal has large gaps in the seal while not under vacuum, try turning on the vacuum and pushing on the door. If the door starts to seal only after pushing on the door, then the door needs to be adjusted so there are less gaps around the door. Sometimes the doors shift in transit and can cause this issue. You can also make sure that the door handle is completely closed. This will have a similar affect.

Avatar
Discard